Cisco CRS-FP140 CRS-3 Forwarding Processor Card (140 Gbps) IPUCAZZBAC

For sale is a Cisco CRS-FP140.
Follow the link for more information on the CRS-FP140.

Includes:

Cisco CRS-FP140

Condition

These items are in Good condition. Items may have scratches, if you need mint condition let us know and we will see if we have a unit that meets your needs.

These items have been fully tested by our professional tech team. Test notes are below; let us know if you are looking for any information not shown.
*System Software/module revision in console below may vary on each piece unless specified above or in title*

RP/0/RP0/CPU0:ios(admin)#sho diag 0/6/cpu0 det Fri Apr 28 22:24:39.539 UTC CARD 0/6/* : Cisco CRS Series Forwarding Processor 140G MAIN: board type 50006a 800-33490-04 rev B0 dev N/A S/N SAD152802GJ PCA: 73-12963-04 rev A0 PID: CRS-FP140 VID: V03 CLEI: IPUCAZZBAC ECI: 180033 RMA: Test Hist: ab, RMA#: 00-00-00, RMA Hist: 00 DIAGNOSTICS RESULTS: ENTRY 1: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 ENTRY 2: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 ENTRY 3: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 PLIM 0/PL6/* : Cisco CRS Series 14x10GbE LAN/WAN-PHY Interface Module MAIN: board type 60011e 800-32837-02 rev B0 dev N/A S/N SAD153000U9 PCA: 73-12653-05 rev A0 PID: 14X10GBE-WL-XFP VID: V02 CLEI: IPU3AUHCAB ECI: 179185 RMA: Test Hist: ab, RMA#: 00-00-00, RMA Hist: 00 DIAGNOSTICS RESULTS: ENTRY 1: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 ENTRY 2: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 ENTRY 3: 0 TIMESTAMP: 00/00/0000 00:00:00 VERSION: v0.0 PARAM1: 0 PARAM2: n/a TESTNUM: 0 RESULT: 0 (PASS) ERRCODE: 0 Interface port config: 14 Ports Optical reach type: Unknown Connector type: LC NODE 0/6/CPU0 Node State : IOS XR RUN PLD: Motherboard: 0x0024, Processor: 0x0008, Power: N/A ROMMON: Version 2.07(20120621:103547) [CRS ROMMON] CPU0: N/A, CPU1: N/A SPEED: OSC Speed: N/A, CPU Speed: 1870 Mhz BUS Speed: 1067 Mhz, MEM Speed: 667 Mhz MEM Size: 4096 Mbytes RP/0/RP0/CPU0:ios(admin)#sho diagn res loc 0/6/cpu0 Fri Apr 28 22:24:54.770 UTC Current bootup diagnostic level for FP-140G 0/6/CPU0: bypass FP-140G 0/6/CPU0: Overall diagnostic result: PASS Diagnostic level at card bootup: bypass Test results: (. = Pass, F = Fail, U = Untested) 1 ) ControlEthernetPingTest ———> . 2 ) SelfPingOverFabric ————–> . 3 ) RommonRevision ——————> . 4 ) ScratchRegisterTest: Device 1 2 3 4 5 6 ———————— . . . . . . 5 ) PSEMemoryBISTTest: Device 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 —————————————————————————— U U U U U U U U U U U U U U U U U U U U U U U U Device 25 26 27 28 29 30 31 32 —————————— U U U U U U U U 6 ) FabricqMemoryBISTTest: Device 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ———————————————————— U U U U U U U U U U U U U U U U U U 7 ) EgressqMemoryBISTTest: Device 1 2 3 4 5 6 7 8 9 ——————————— U U U U U U U U U 8 ) IngressqMemoryBISTTest: Device 1 2 3 4 5 6 7 8 9 ——————————— U U U U U U U U U RP/0/RP0/CPU0:ios(admin)#sho inv Fri Apr 28 22:24:59.439 UTC NAME: “0/6/*”, DESCR: “Cisco CRS Series Forwarding Processor 140G” PID: CRS-FP140 , VID: V03, SN: SAD152802GJ NAME: “ControlEthernet0/6/CPU0”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/PL6/*”, DESCR: “Cisco CRS Series 14x10GbE LAN/WAN-PHY Interface Module” PID: 14X10GBE-WL-XFP , VID: V02, SN: SAD153000U9 NAME: “0/RP0/*”, DESCR: “Cisco CRS-1 Series 8 Slots Route Processor” PID: CRS-8-RP , VID: V010, SN: SAD150300WX NAME: “MgmtEth0/RP0/CPU0/0”, DESCR: “RP Mgmt Port” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/1”, DESCR: “INTRA_RACK_SWITCH_PORT_0” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/2”, DESCR: “INTRA_RACK_SWITCH_PORT_1” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/3”, DESCR: “INTRA_RACK_SWITCH_PORT_2” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/4”, DESCR: “INTRA_RACK_SWITCH_PORT_3” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/5”, DESCR: “INTRA_RACK_SWITCH_PORT_4” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/6”, DESCR: “INTRA_RACK_SWITCH_PORT_5” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/7”, DESCR: “INTRA_RACK_SWITCH_PORT_6” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/8”, DESCR: “INTRA_RACK_SWITCH_PORT_7” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/9”, DESCR: “INTRA_RACK_SWITCH_PORT_8” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/10”, DESCR: “INTRA_RACK_SWITCH_PORT_9” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/11”, DESCR: “INTRA_RACK_SWITCH_PORT_10” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/12”, DESCR: “INTRA_RACK_SWITCH_PORT_11” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/13”, DESCR: “INTRA_RACK_SWITCH_PORT_12” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/14”, DESCR: “INTRA_RACK_SWITCH_PORT_13” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/15”, DESCR: “INTRA_RACK_SWITCH_PORT_14” PID: , VID: N/A, SN: NAME: “ControlEthernet0/RP0/CPU0/S0/16”, DESCR: “INTRA_RACK_SWITCH_PORT_15” PID: , VID: N/A, SN: NAME: “0/SM0/*”, DESCR: “Cisco CRS Series 8 Slots Fabric Card / Single (140G)” PID: CRS-8-FC140/S , VID: V02, SN: SAD151200YG NAME: “ControlEthernet0/SM0/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/SM1/*”, DESCR: “Cisco CRS Series 8 Slots Fabric Card / Single (140G)” PID: CRS-8-FC140/S , VID: V02, SN: SAD15270217 NAME: “ControlEthernet0/SM1/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “0/SM3/*”, DESCR: “Cisco CRS Series 8 Slots Fabric Card / Single (140G)” PID: CRS-8-FC140/S , VID: V02, SN: SAD150802H1 NAME: “ControlEthernet0/SM3/SP”, DESCR: “CPU_PORT_0” PID: , VID: N/A, SN: NAME: “Rack 0 – Chassis”, DESCR: “Cisco CRS Series 8 Slots Line Card Chassis” PID: CRS-8-LCC , VID: V01, SN: TBA11130070 NAME: “Rack 0 – Fan Tray Upper”, DESCR: “Cisco CRS-1 Series Fan Tray for 8 slots LCC” PID: CRS-8-LCC-FAN-TR , VID: V03, SN: TBA11130052 NAME: “Rack 0 – Fan Tray Lower”, DESCR: “Cisco CRS-1 Series Fan Tray for 8 slots LCC” PID: CRS-8-LCC-FAN-TR , VID: V03, SN: TBA11130053 NAME: “Rack 0 – Power Supply A0”, DESCR: “Cisco CRS-1 Series AC Power Module 3000W” PID: CRS-PM-AC , VID: V03, SN: DTM155100LQ NAME: “Rack 0 – Power Supply A1”, DESCR: “Cisco CRS-1 Series AC Power Module 3000W” PID: CRS-PM-AC , VID: V03, SN: DTM155100J7 NAME: “Rack 0 – Power Supply A2”, DESCR: “Cisco CRS-1 Series AC Power Module 3000W” PID: CRS-PM-AC , VID: V03, SN: DTM155100XU RP/0/RP0/CPU0:ios(admin)#sho ver Fri Apr 28 22:25:06.813 UTC Cisco IOS XR Software, Version 4.0.1[Default] Copyright (c) 2011 by Cisco Systems, Inc. ROM: System Bootstrap, Version 2.01(20100723:223432) [CRS-1 ROMMON], ios uptime is 55 minutes System image file is “bootflash:disk0/hfr-os-mbi-4.0.1.CSCtj02016-1.0.0/mbihfr-rp.vm” cisco CRS-8/S (7457) processor with 4194304K bytes of memory. 7457 processor at 1197Mhz, Revision 1.2 Cisco CRS Series 8 Slots Line Card Chassis 1 Management Ethernet 14 WANPHY controller(s) 14 TenGigE 1019k bytes of non-volatile configuration memory. 34338M bytes of hard disk. 4098996k bytes of disk0: (Sector size 512 bytes). 1000432k bytes of disk1: (Sector size 512 bytes).

Dedicated Networks stands by the products we sell. If an item hasn’t met your expectations, you can send it back within one year from the date of purchase for exchange, refund, credit, or repair.

Read our Guarantee & Return Policy