Cisco 7600-SIP-200 Cisco 7600 Series SPA Interface Processor 200 IPU2ALGDAA


Out of stock


Up for sale is a Cisco 7600-SIP-200. This unit is tested and in perfect working condition!

*IOS / module revision in console below may vary on each piece unless specified above or in title*

Router#sh ver Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3) Technical Support: Copyright (c) 1986-2014 by Cisco Systems, Inc. Compiled Sat 01-Feb-14 02:46 by prod_rel_team ROM: System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1) BOOTLDR: Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 15.3(3)S2, RELEASE SOFTWARE (fc3) Router uptime is 7 minutes Uptime for this control processor is 7 minutes System returned to ROM by power cycle at 05:02:37 UTC Sat Jul 1 2000 (SP by power on) System image file is ‘disk0:c7600s72033-advipservicesk9-mz.153-3.S2.bin’ Last reload type: Normal Reload Last reload reason: reload cisco CISCO7606 (R7000) processor (revision 1.0) with 458720K/65536K bytes of memory. Processor board ID FOX09391162 SR71000 CPU at 600MHz, Implementation 1284, Rev 1.2, 512KB L2 Cache Last reset from power-on 1 SIP-200 controller . 1 Virtual Ethernet interface 2 Gigabit Ethernet interfaces 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory. 65536K bytes of Flash internal SIMM (Sector size 512K). Configuration register is 0x2102 Router#sh mod 3 Mod Ports Card Type Model Serial No. — —– ————————————– —————— ———– 3 0 4-subslot SPA Interface Processor-200 7600-SIP-200 JAE12067VPI Mod MAC addresses Hw Fw Sw Status — ———————————- —– ————- ———— ——- 3 001e.f7a7.a800 to 001e.f7a7.a83f 2.303 15.3(3)S2 15.3(3)S2 Ok Mod Sub-Module Model Serial Hw Status —- ————————— —————— ———– ——- ——- 3/0 4xT3E3 SPA SPA-4XT3/E3 JAE11474M1C 1.1 Ok 3/1 4xT3E3 SPA SPA-4XT3/E3 JAE11506J3Z 1.1 Ok Mod Online Diag Status —- ——————- 3 Pass 3/0 Pass 3/1 Pass Router#sh diagn res mod 3 Current bootup diagnostic level: complete Module 3: 4-subslot SPA Interface Processor-200 SerialNo : JAE12067VPI Overall Diagnostic Result for Module 3 : PASS Diagnostic level at card bootup: complete Test results: (. = Pass, F = Fail, U = Untested) 1) TestTxPathMonitoring ————> . 2) BusConnectivityTest ————-> . 3) TestEobcStressPing ————–> U 4) TestFirmwareDiagStatus ———-> . 5) TestErrorCounterMonitor ———> U Router#sh inv NAME: ‘CISCO7606’, DESCR: ‘Cisco Systems Cisco 7600 6-slot Chassis System’ PID: CISCO7606 , VID: , SN: FOX09391162 NAME: ‘CLK-7600 1’, DESCR: ‘OSR-7600 Clock FRU 1’ PID: CLK-7600 , VID: , SN: NWG093301J4 NAME: ‘CLK-7600 2’, DESCR: ‘OSR-7600 Clock FRU 2’ PID: CLK-7600 , VID: , SN: NWG093301J4 NAME: ‘module 3’, DESCR: ‘Cisco 7600 Series SPA Interface Processor-200 Rev. 2.303’ PID: 7600-SIP-200 , VID: V05, SN: JAE12067VPI NAME: ‘SPA subslot 3/0’, DESCR: ‘4-port T3/E3 Serial Shared Port Adapter’ PID: SPA-4XT3/E3 , VID: V02, SN: JAE11474M1C NAME: ‘SPA subslot 3/1’, DESCR: ‘4-port T3/E3 Serial Shared Port Adapter’ PID: SPA-4XT3/E3 , VID: V02, SN: JAE11506J3Z NAME: ‘module 6’, DESCR: ‘WS-SUP720-BASE 2 ports Supervisor Engine 720 Rev. 3.1’ PID: WS-SUP720-BASE , VID: , SN: SAD0834000J NAME: ‘msfc sub-module of 6’, DESCR: ‘WS-SUP720 MSFC3 Daughterboard Rev. 2.3’ PID: WS-SUP720 , VID: , SN: SAD083203F7 NAME: ‘switching engine sub-module of 6’, DESCR: ‘WS-F6K-PFC3B Policy Feature Card 3 Rev. 2.3’ PID: WS-F6K-PFC3B , VID: V01, SN: SAL1223TAXE NAME: ‘PS 1 PWR-1900-AC/6’, DESCR: ‘AC_6 power supply, 1900 watt 1’ PID: PWR-1900-AC/6 , VID: , SN: DCA0846400Q NAME: ‘PS 2 PWR-1900-AC/6’, DESCR: ‘AC_6 power supply, 1900 watt 2’ PID: PWR-1900-AC/6 , VID: , SN: DCA0835406B

Additional information

Weight 11 lbs
Dimensions 18 × 12 × 18 in



DNI's Easy 1-Year Warranty

Every sale includes DNI's Easy 1-Year Satisfaction Guarantee. We are dedicated to meeting and exceeding your expectations. If we haven't, please let us know. If there are any issues that cannot be resolved, you may simply return the item for a full refund.


We offer Free shipping via UPS Ground to the Continental US. Below is a map showing typical transit times. Expedited shipping upgrades are always available. We may even be able to ship the same day we receive payment, let us know if you are in a hurry! Local pick up is available and always free.

International buyers note:

  • Orders typically ship via USPS, contact us for rates and transit times if you would like a different service.
  • We can often ship for a lower price than is calculated in the listing. Please contact us for your most accurate shipping quote.
  • We need your phone number before we can ship, as it is required for commercial invoices and customs.
  • We are not responsible for duties and taxes. Those are to be paid by the recipient/buyer.
  • We will not declare a value under what is paid for the equipment.

More Info

We have thousands of items in our inventory, many of which are not listed in our store.Please message us if you have any questions, or if you require any information that is not described here.

We buy networking equipment! We buy Juniper, Cisco, Extreme, Foundry, Brocade, Dell, 3Com and more! If you have any hardware collecting dust, get in touch with us.